So-Strong Pigment – 9 Colour Set are highly concentrated, offer excellent dispersion and consistent colour. A very small amount will colour a proportionally large amount of liquid urethane material. The more you add in proportion to the volume of liquid urethane, the more dramatic the colour effect. Recommended loading range is .01% to 3% of total system weight. Do not overload the liquid urethane system or cure inhibition / oozing may occur.
User determines amount to add; If this is your first time adding colour tint or pigment to a urethane system you may want to test the colour effect first. Add a few drops to a small amount of urethane material and observe the outcome. It may take a few test castings to attain the desired colour outcome.
Colour Tints: Black, Yellow, Brown, Purple, Green, Orange, Red and Blue.
Colour Pigments: White and Fleshtone
Instructions
To get you started, we offer the following colourant loading levels. Results may vary.
By Weight Using A Gram Scale: Add So-Strong Pigment at a ratio of between 0.01% – 3% of the total weight (Parts A + B mixed) of the material being cast. Adding more than 3% by weight may cause cure inhibition.
By Volume Measured In Drops: Add 10 drops of So-Strong per 88 ml of mixed urethane material. If using a translucent material you can use 1 drop to maintain translucency of the material.
Directions For Use: Store and use at 23°C. Wear vinyl gloves to prevent skin contact. After dispensing the required amount of urethane material Parts A and B into measuring containers, add colourant to Part B and mix thoroughly. Combine Parts A and B into a mixing container and mix as directed by the urethane product technical bulletin.
Blending Colours: Combine different colours on a palette to create a custom colour before adding to material as directed above.
Other products you may be interested in:
