Description
Bonds to: Cardboard, foamed rubber, plastics, polystyrene, textiles, metals, photographs, reproductions, wood & glass.
Directions: Shake can thoroughly before each use. Apply to clean surfaces only. Hold can 15cm to 25cm from the surface to be bonded and spray a thin even coat.
For permanent bonds: On porous materials, both surfaces must be coated. Allow sufficient drying time for adhesive to become tacky before joining.
For temporary bonds: Spray a light coat to one surface and allow to dry for at least 5 minutes before mounting. Substrates can easily be removed when desired, without transfer.
After use: To clear valve of adhesive, hold can bottom-up and spray until only gas escapes. Spray tips may be cleaned with turpentine.
