Bostik Super Glues

R 55.00

Add to Wishlist
Add to Wishlist
SKU: N/A Category: Tag:

Description

Bostik Blits Stik is ideal for instant DIY repair work in and around the home such as, repairing of figurines, costume jewellery, and toys. It is ideal for handicraft applications and gluing of small parts where clamping is not possible and can be used for minor repairs in the car such as a loose rear view mirror or cracked tail light. It can be used as a thread lock adhesive to prevent loosening of bolts. Add to sodium bicarbonate or wood flour to make a filler for repair of cracks and voids. It is safe for using in aquariums for fixing of rocks and corals. Use also as a ‘temporary fix’ to hold things in place.

  • Not suitable for paper, silicone rubber, and plastics such as polyethylene, polypropylene and Teflon.
  • Not suitable where a flexible or gap filling bond is required.
  • Not suitable for use in dishwasher, oven or microwave.

HOW TO USE

  1. Ensure that surfaces are prepared as above.
  2. Open the tube by screwing the nozzle down to break the seal.
  3. Apply one drop or smallest amount possible to one surface only. A thin glue film gives the strongest bond. Do not spread.
  4. Press both surfaces together, wipe off excess with cloth, making sure that both substrates are well matched and tight fitting.
  5. Keep pressed or held together for at least 30 seconds. DO NOT MOVE OR REPOSITION glued joint as this may impair final bond.
  6. Setting time is affected by the nature of the substrate, ambient humidity, and temperature. Cold weather and condition of low humidity will retard setting time.
  7. The glued item may be handled after 10min, however maximum bond strength if achieved after 12 hours.
  8. After completion of job, wipe tip of plastic nozzle, replace cap tightly and store in a cool upright position.
  9. To avoid adhesive whitening / blooming (caused by uncured super glue), always apply the smallest amount of glue, do not apply in hot temperatures or high humidity, and ensure a good airflow over the parts while assembling.

CLEANING

Uncured adhesive can be wiped off with a damp cloth. Cured adhesive can be removed mechanically with a sharp blade, with acetone or boiling water.

STORAGE STABILITY

Bostik Blits Stik has a shelf life of at least 12 months if stored in a cool (below 21°C), dry place in its original moisture-tight container. We recommend storing in a refrigerator to lengthen the shelf life. Refrigerated packaging should be allowed to return to room temperature prior to use. Take care to store out of reach of small children. If the material is kept beyond the recommended shelf life, it is not necessarily unusable, but a check should be performed to observe whether the product is still workable.

 

Additional information

Types

Blits Stik 3g